



94 Photos
Located
Capac, MI
Capac, MI
Usage
6,283 mi
6,283 mi
Serial number
610289
610289
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15733324
In yard
No
Features
6.5 L Diesel Engine, Automatic Transmission, 4x4, 10,000 lb. GVWR, 37x12.50R16.5 Tires
Notes
***Buyer will need to complete and submit a Hold Harmless Agreement before scheduling pickup. This HMMWV is available for pick up as shown. Ritchie Bros. does not offer titles for HMMWVs. This unit will sell with a clean SF97 only if purchased during checkout. Please see DLA supplied Tire Safety Warning document below.***




































Spin
DTID
Serial Number / VIN
610289
Paint
Sheet Metal Condition
Some panels are dented.
Mirrors
Left missing glass
Exterior Lights
Some not operational

























Glass Condition
Cloudy
Seating
Torn
Seat Belts
Operational
Steering Control
Drivetrain Controls
Master Cylinder/Brake Control
Park Brake
Stopped the vehicle while rolling
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
The fuel gauge are inoperable.
Odometer
6283 mi-No guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.













Emission Certification Label
Exempted
Oil Pump/Tach Drive (behind doghouse cover)
Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Right Side
Engine - Left Side
Limited Function Check
After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting., Required ether to start.








Transmission
Operational
Transfer Case
Operational
Steer Axle
Rear Drive Axle
Limited Function Check
The drivetrain was operational.












Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Tire Condition
Wheel Condition
Wheel Studs, Nuts, Lugs
Rust
Shipping Dimensions
Length: 188.5”, Width: 86”, Height: 72”
Machine Weight
Weight: 5,600 lbs.
Items must be paid in full by Wednesday, January 8, 2031. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.