



103 Photos
Located
Memphis, TN
Memphis, TN
Usage
1,316 hrs
1,316 hrs
Serial number
55471
55471
Loading...
ID number
#15618107
In yard
No
Features
2007 US EPA Label, Cummins A2300 50 hp 2.29 L Diesel Engine, 7 ft Minimum 19 ft Maximum Boom Length, 8 ft Swingaway Jib, 60 lb 4.5 ton Capacity 1 Sheave Hook Block, 40 lb 4000 lb Capacity Overhaul Ball

























Serial Number / VIN
55471
Hour Meter / Odometer
1316 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Exterior Lights
Operational
Safety Certification Label
Safety Certification Label not legible.
Safety Certification Report
Safety Certification Report Available
Load Chart
Yes

Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual













Seats/Armrests
Load Moment Indicator
Operational
Anti Two Block
Not operationally checked
Hydraulic Controls
Drivetrain Controls
Warning Lights
Operational
Gauges
Oil Temp gauge is inoperable
Limited Function Check
The main components are in place and operational as noted.











Emissions Status
2007 US EPA Label
Emission Label
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.



Front Drive Axle
Front Axle Oscillating Pin
Limited Function Check
The drivetrain was operational. Seller states after warmed up, drive motors have issues and operate slowly.














Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Main Hoist
Lift Cylinders
Telescopic Boom Cylinders
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.





























Steering Linkage
Steering Cylinders
Steering Wheel Play
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Turntable Bearing
Some movement
Frame Condition
Tire Size
7.50-10 tires
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs
Limited Function Check
The main chassis components were operational in a limited check.
Outrigger Cylinders
Outrigger Condition
Main Boom Pins
Main Boom Sections
Sheaves
Boom Head Section
Wear Pads
Boom Angle Indicator
Limited Function Check
The main crane components functioned when checked without a load.







Jib
Main Load Block
Overhaul Ball
Items must be paid in full by Thursday, August 27, 2026. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.