171 Photos
2007 Manitowoc 10000 100 ton Lattice-Boom Crawler Crane
Located
Elberfeld, IN
Usage
15,132 hrs
Serial number
1094
Loading...
Detailed equipment information
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12212419
In yard
No
Year
2007
Manufacturer
Model
Asset type
Serial number or VIN
1094
Features
Air Conditioner, Anti Two-Block, Load Moment Indicator, 2007 US EPA Label, 100 ft Boom, Self Erecting, Auxiliary Hoist, Rooster Sheave, McKissick 4 Sheave Hook Block, 757 lb 19 ton Overhaul Ball, 35.5 in Single Grouser Track Shoes
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
1094, The serial number is not legible. This unit may be difficult to export.
Hour Meter / Odometer
15132 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Load Chart
No
Safety Certification Label
There is a safety certification label with a date of August 24
Safety Certification Report
Safety Certification Report Available
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Not operational
Safety
Travel Alarm
Inoperable
Horn
Inoperable
Seat Belts
Not equipped
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Control Station - Upper
Mirrors
Glass
No visible damage
Seats/Armrests
Load Moment Indicator
Not operationally checked with a load.
Controls Hydraulic or Air
Load Charts
None found
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Inoperable
Gauges
Gauges did not move during inspection
Hoist Brakes
Drum Rotation Indicator
Operational
Air Conditioner
The ambient temperature is too cold to check.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
2007 US EPA Label
Emission Label
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Drive Motors
Final Drives
Dripping Leak, Left side is dripping where drive motor and final drive meet
Limited Function Check (Drivetrain-Crawler Crane)
The drivetrain functioned properly without a load.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Oil is not visible in sight glass
Hoses (Hydraulic)
Swing Motor
Main Hoist
Auxiliary Hoist
Limited Function Check
The hydraulic system was operational.
Crane Superstructure
Hoist Drums
Hydraulic Operation
Boom Drums
Hydraulic Operation
Main Boom Pins
Pendant Line (Boom Tension Line)
Cable Type
Point Sheaves
Boom Point Section
Gantry/Mast
Boom Stops
Main Boom Chords
Boom Length
100 ft overall length, 20 ft tip section, 2 Sections, 60 ft Length, 20 ft base section
Boom Angle Indicator
Turntable Bearing
Bottom Covers
Swing Drive
Operational
Limited Function Check
The main chassis components functioned when checked without a load.
Undercarriage
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
Left Track Links
Left Track Bushings
Left Carrier Rollers
Left Track Rollers
4th roller from the back has a dripping oil leak
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
Right Track Links
Right Track Bushings
Right Carrier Rollers
Right Track Rollers
Right Idler
Right Sprocket
Specialty
Main Load Block
Minor wear
Overhaul Ball
Counterweights
Oil Sample Analysis
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Jan 31, 2025 | Jan 31, 2025 |
| Silicon | 1.66 PPM | 3.05 PPM |
| Tin | 0.76 PPM | 0.3 PPM |
| Silver | 0 PPM | 0.53 PPM |
| Aluminum | 0.75 PPM | 0.47 PPM |
| Chromium | 0 PPM | 0 PPM |
| Lead | 0 PPM | 0.68 PPM |
| Copper | 0.42 PPM | 16.9 PPM |
| Nickel | 1.38 PPM | 0.84 PPM |
| Iron | 1.65 PPM | 2.67 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Saturday, March 1, 2025. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(863) 420-9919Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.