52 Photos
Las vegas, NV
21,002 mi (33,800 km)
2NKMLD9X27M153054
Loading...
An inspection report will be available soon. Please check back later.
ID number
#13551749
In yard
Yes
Year
2007
Manufacturer
Model
Asset type
Serial number or VIN
2NKMLD9X27M153054
Features
Cat C7 6 Cylinder Diesel Engine, 6125 Engine hrs, Eaton Fuller 8-Speed Manual Transmission, 12600 lb Front Axle, 40000 lb Rears, Spicer DSP41 Drive Axles, 4.11:1 Axle Ratio, 54600 lb GVWR, 11R22.5, Spring over Walking Beam Suspension, 190 in Wheelbase, PTO, 4000 gal Steel Tank, PTO Driven Pump, 0 ft 88 in, Spray Bar, Hose Reel, Front Spray, Rear Spray, Side Spray
Notes
; THE CLOSING TIMES OF LOTS 398 THRU 406 ARE TIED TOGETHER. IF A BID IS RECEIVED, THEN A TIME EXTENSION WILL BE APPLIED TO ALL LOTS. ONCE THE TIME CLOSES, THE HIGH BIDDER ON EACH PIECE WILL BE THE WINNER.
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
2NKMLD9X27M153054
Second Serial Number/VIN Photo
Hour Meter / Odometer
21002 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Emissions Information
US EPA Label not legible
Limited Function Check
The engine started and ran.
Limited Function Check
The drivetrain was operational.
Brakes
The brakes are operational. Covered
Engine Hours
6125 Engine hrs
Limited Function Check
The main components are in place and operational as noted.
Deficiencies
Deficient Components/Systems Include but are not limited to: Other ABS light on
Items must be paid in full by Saturday, June 21, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.