80 Photos
Morris, IL
167,328 mi (269,289 km)
2NPNHD7X15M845368
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#12879145
In yard
Yes
Year
2005
Manufacturer
Model
Asset type
Serial number or VIN
2NPNHD7X15M845368
Features
Cat C7 6 Cylinder 7.2 L Diesel 350 hp Engine, 2004 US EPA Label, Eaton Fuller RT8709B 9-Speed Manual Transmission, 12000 lb Front Axle, 21000 lb Rears, Dana Spicer 210603 Drive Axles, 4.11:1 Axle Ratio, 33000 lb GVWR, Aluminum Wheels, 315/80R22.5 Front Tires, 11R22.5 Rear Tires, Double Frame, Low Air Leaf Air Ride Suspension, 210 in Wheelbase, PTO, Maintainer 18 ft Body, Hydraulic Stabilizers, Maintainer 5220 10000 lb 3 Section Hydraulic Crane, Wired Remote Control, Quincy QTS-5 Hydraulic Air Compressor
Spin
Featured Photo
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
2NPNHD7X15M845368
Second Serial Number/VIN Photo
Frame is rusty, frame stamp is not legible
Hour Meter / Odometer
167328 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Emissions Information
2004 US EPA Label
Limited Function Check
The engine started and ran.
Limited Function Check
The drivetrain was operational.
Brakes
The brakes are operational.
Limited Function Check
The hydraulic system was operational.
Engine Hours
No hr meter
Limited Function Check
The main components are in place and operational as noted.
Items must be paid in full by Friday, April 4, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.