97 Photos
Minden, LA
4,879 hrs
2251166
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12944123
In yard
No
Year
2002
Manufacturer
Model
Asset type
Serial number or VIN
2251166
Features
Air Conditioner, Anti Two-Block, Epic Load Moment Indicator, 160 ft Boom, Self Erecting, Rooster Sheave, Johnson 9242 lb 5 Sheave 150 ton Hook Block, 333570 lb Counterweight, 48 in Single Grouser Track Shoes
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
2251166
CE Mark
No CE mark found
Hour Meter / Odometer
4879 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Safety Certification Label
There is a safety certification label with a date of 8/9/24
Safety Certification Report
Safety Certification Report Not Available
Load Chart
Yes
Travel Alarm
Inoperable
Horn
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Mirrors
Glass
No visible damage
Seats/Armrests
Load Moment Indicator
Not operationally checked with a load., Manitowoc, 196585 3-30-01
Controls Hydraulic or Air
Load Charts
Posted on cab wall
Oil Pressure
The gauge registers in the operating range. 75 PSI
Warning Lights
Operational
Gauges
Operational
Hoist Brakes
Drum Rotation Indicator
Air Conditioner
The ambient temperature is too cold to check.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
US EPA Label not legible
Emission Label
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Steering Clutches (Crane)
Drive Chains/Sprockets
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Crawler Crane)
The drivetrain functioned properly without a load.
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Main Hoist
Limited Function Check
The hydraulic system was operational.
Hoist Drums
Boom Drums
Hoist and Boom Clutches
Main Boom Pins
Point Sheaves
Boom Point Section
Gantry/Mast
Boom Stops
Main Boom Chords
Boom Length
4x 40’ , 1x 10’ Sections, 0 m base section, 170’ of boom laying on the ground.
Boom Angle Indicator
Turntable Bearing
Swing Drive
Operational
Limited Function Check
The main chassis components functioned when checked without a load.
Left Roller Frame
Left Track Pads
Left Idler
Left Sprocket
Right Roller Frame
Right Track Pads
Right Idler
Right Sprocket
Main Load Block
Overhaul Ball
Counterweights
Oil Sample Analysis
engine | |
---|---|
date of analysis | Feb 13, 2025 |
Silicon | 2.13 PPM |
Tin | 1.67 PPM |
Silver | 0 PPM |
Aluminum | 0.49 PPM |
Chromium | 0.14 PPM |
Lead | 2.23 PPM |
Copper | 0.97 PPM |
Nickel | 0.91 PPM |
Iron | 3.99 PPM |
Glycol | NEG |
Water | NEG |
Fuel | <5% |
Items must be paid in full by Saturday, March 1, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.