



62 Photos
Located
Donaldson, AR
Donaldson, AR
Usage
2,516 hrs
2,516 hrs
Serial number
653202
653202
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#14850415
In yard
No
Features
2 Stage Mast, 76 in Max Lift Height, 108 in Lowered Mast Height, 48 in Forks, Fork Positioner, Block Forks, Deutz 4FL1011F 4 Cylinder Diesel Engine
















Serial Number / VIN
653202
CE Mark
No CE mark found
Hour Meter / Odometer
2516 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Not operational

Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual





Seats/Armrests
Hydraulic Controls
Steering Control
Drivetrain Controls
Limited Function Check
The main components are in place and operational as noted.












Starter
Operational
Exhaust System
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.






Front Drive Axle
Rear Drive Axle
Drive Motors
Final Drives
Limited Function Check
The drivetrain was operational.










Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Steering Cylinders
Mast Lift Cylinders
Mast Tilt Cylinders
Fork Positioning Cylinder (on fork carriage)
Limited Function Check
The hydraulic system was operational.












Mast/Boom Condition
Carriage Rollers and Guides
Load Back Rest
Side Shift
Forks
Steering Linkage
Frame Condition
Park Brake
Held against power
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Mar 18, 2026 | Mar 18, 2026 |
| Silicon | 3.86 PPM | 0 PPM |
| Tin | 0.62 PPM | 0.1 PPM |
| Silver | 0 PPM | 0.03 PPM |
| Aluminum | 0.32 PPM | 0 PPM |
| Chromium | 1.83 PPM | 0.02 PPM |
| Lead | 0.12 PPM | 0.31 PPM |
| Copper | 0 PPM | 0 PPM |
| Nickel | 0 PPM | 0 PPM |
| Iron | 5.82 PPM | 0 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.