71 Photos
2000 Powerscreen Mark II Portable Screen Plant
Located
Indianapolis, IN
Usage
4,617 hrs
Serial number
2747227
Loading...
Detailed equipment information
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12820036
In yard
No
Year
2000
Manufacturer
Model
Asset type
Serial number or VIN
2747227
Features
Deutz 4 Cylinder Diesel Engine, Belt Feeder w/Grizzly 6 ft 6 in x 4 ft Double Deck Screen, 24 in Wide Feed Conveyor, S/A Carrier
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
2747227
Hour Meter / Odometer
4617 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Control Station
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted.
Engine
Emission Certification Label
None found
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check (Engine)
After jump starting, the engine ran.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Oil accumulation
Hydraulic Tank
Hoses
Conveyor Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Feed Hopper
Grizzly length: 5’ 6”, Width between grizzly bars: 5”
Feed Conveyor Condition
Feed Conveyor Frame
Feed Conveyor Drive Motor
Feed Conveyor Rollers
Feed Conveyor Head and Tail Pulley
Screen Deck
Number of decks: 2!
Deck Frames / Wear Bars
Chute Condition
Carrier
Axle Condition
Limited Function Check
The main components were operational with movement as indicated
Tire Size
All of the tires are the same size, 7.50R16 Front tires
Tire Condition
Wheel Condition
Wheel Studs
Tongue/ Hitch Condition
No visible damage
Power Receptacle Functional
Not operationally checked
Lights/Wiring Condition
Not operationally checked
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jan 31, 2025 |
| Silicon | 9.98 PPM |
| Tin | 0.52 PPM |
| Silver | 0 PPM |
| Aluminum | 1.9 PPM |
| Chromium | 0.67 PPM |
| Lead | 1.2 PPM |
| Copper | 3.24 PPM |
| Nickel | 2.25 PPM |
| Iron | 25.07 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Saturday, March 1, 2025. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(863) 420-9919Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.