91 Photos
2000 John Deere 850C Crawler Dozer
Located
Greensboro, NC
Greensboro, NC
Usage
9,564 hrs
9,564 hrs
Serial number
T0850CX884640
T0850CX884640
Loading...
Detailed equipment information
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#14725217
In yard
No
Year
2000
Manufacturer
Model
Asset type
Serial number or VIN
T0850CX884640
Features
Open Operator Station, 128 in Wide Semi-U Blade w/ Single Tilt, Drawbar, 24 in Single Grouser Track Shoes
Notes
Comes with Ironclad Assurance
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
T0850CX884640
CE Mark
No CE mark found
Hour Meter / Odometer
9564 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/Armrests
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
Gauge inoperable
Warning Lights
Operational
Gauges
Operational, Fuel gauge and oil pressure gauge inoperable
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
No US EPA Label Present
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Operational
Service Brakes
Brake has to be pushed to the floor to stop unit. Weak brakes
Drive Motors
Pulled unevenly, Left side appears to run slightly faster than right side
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational except as noted.
Hydraulics
Pumps (Hydraulics)
Valves
Dripping leak
Hydraulic Tank
Hoses (Hydraulics)
Blade Lift Cylinders
Cylinders appear to be bent slightly
Blade Tilt Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Blade Condition
Blade Cutting Edge Condition
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions
Shims remaining
Tilt Linkage Pins and Bushings
Shims remaining
Blade Trunnions/bushings
Limited Function Check (dozer)
The main components were operational in a limited check.
Frame Condition
Belly Pans
Specialty
Undercarriage
Pivot Shafts
Equalizer Bar Pivot Points
Heavy play in pivot shaft
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
34 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Carrier Rollers
Left Track Rollers
Left Front Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
35 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Carrier Rollers
Right Track Rollers
Right Front Idler
Right Sprocket
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Saturday, February 28, 2026. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(863) 420-9919Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.