



83 Photos
Located
Emmett, ID
Emmett, ID
Usage
5,669 hrs
5,669 hrs
Serial number
FT4C1572072399
FT4C1572072399
Loading...
ID number
#14690602
In yard
No
Features
Forestry Package, Fire Suppression System, Hydraulic Tilting Cab, 2002 US EPA Label, quadco Log Grapple, Grapple Saw, 23 in Single Grouser Track Shoes, Rock Guards









Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational, End of stick
Swing Motor
Boom Lift Cylinder(s)
Stick Cylinder
Live Heel Cylinder
Grapple Clamp Cylinders
Grapple Rotation Motor
Limited Function Check
The hydraulic system was operational.














Featured Photo
Serial Number / VIN
FT4C1572072399
Hour Meter / Odometer
5669 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Not operational

Horn
Inoperable
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Swing Brake
Operational
Current Safety Manual
Current Operator/Maintenance Manual










Seats/Armrests
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
The ambient temperature is too cold to check
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.








Engine
2002 US EPA Label
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.




Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Limited Function Check
The drivetrain was operational.
















Grapple Condition
Delimber Knives
Boom Condition
Stick Condition
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pins and Bushings Stick to Grapple
Pins and Bushings Stick to Coupler
Turntable Bearing
Bottom Covers
Limited Function Check
The main components were operational in a limited check.
Grapple Arm Pins and Bushings





















Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
70 mm, Weld on extenders
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Carrier Rollers
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
70 mm, Weld on extenders
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Carrier Rollers
Right Track Rollers
Right Idler
Right Sprocket
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Feb 06, 2026 |
| Silicon | 0 PPM |
| Tin | 1.53 PPM |
| Silver | 0 PPM |
| Aluminum | 0.23 PPM |
| Chromium | 0.23 PPM |
| Lead | 0.43 PPM |
| Copper | 0.11 PPM |
| Nickel | 0 PPM |
| Iron | 7.1 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.