



78 Photos
Located
Riverton, WY
Riverton, WY
Usage
8,735 hrs
8,735 hrs
Serial number
6204312
6204312
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#14373723
In yard
No
Features
10 ft 4 in Stick, 29.5 in Triple Grouser Track Shoes, 40 in Digging Bucket, Additional 33 in Digging Bucket















Serial Number / VIN
6204312
Hour Meter / Odometer
8735 hrs, Meter inoperable-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Not operational
Travel Alarm
Inoperable
Horn
Inoperable
Seat Belts
Not equipped
Current Safety Manual
Current Operator/Maintenance Manual









Seats/Armrests
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
Gauge inoperable
Warning Lights
Inoperable
Gauges
Operational
Heater
Inoperable
Limited Function Check
The main components are in place and operational as noted.





Engine
No US EPA Label Present
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Limited Function Check
The engine started and ran.


Left Drive Motor
Right Drive Motor
Limited Function Check
The drivetrain was operational as noted.








Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Swing Motor
Boom Lift Cylinder(s)
Dripping leak
Stick Cylinder
Dripping leak
Bucket Cylinder
Limited Function Check
The hydraulic system is weak.












Boom Condition
Weld repair
Stick Condition
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pin and Bushings Stick to Bucket
Heavy movement
Turntable Bearing
Bottom Covers
Limited Function Check
The main components were operational with damage as noted.




















Left Roller Frame
Left Track Tensioner
Left Track Shoes
Left Grouser Height
22 mm
Left Track Links
Left Carrier Rollers
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Shoes
Right Grouser Height
22 mm
Right Track Links
Right Carrier Rollers
Right Track Rollers
Right Idler
Right Sprocket







Excavator Bucket Condition
Cutting Edge / Teeth / Adapters
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.