



129 Photos
Located
Yakima, WA
Yakima, WA
Usage
613 hrs
613 hrs
Serial number
5051
5051
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15383560
In yard
No
Features
Cummins Engine, 12 ton Capacity Johnson Hook Block






















Serial Number / VIN
5051
CE Mark
No CE mark found
Hour Meter / Odometer
613 hrs, are on the replacement meter and the actual hours on the unit are unknown.-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Right side lights are not operational
Safety Certification Label
There is a safety certification label with a date of 4-10-25 is the most recent label
Safety Certification Report
Safety Certification Report Not Available
Load Chart
No load chart available
Travel Alarm
Operational
Horn
Operational
Seat Belts
Not equipped
Current Safety Manual
Current Operator/Maintenance Manual
Hours of Crane Operation
Not available



























Mirrors
Glass
No visible damage
Seats/Armrests
Anti Two Block
Not operationally checked
Hydraulic Controls
Drivetrain Controls
Oil Pressure
20 PSI
Warning Lights
No warning lights
Gauges
Operational, Fuel gauge does not function gauges are inoperable
Limited Function Check
The main components are in place and operational as noted. The ignition switch works intermittently.








Emissions Status
No US EPA Label Present
Blow-by (subjective visual observation)
Visible
Starter
Operational, Intermittent engagement
Exhaust System
Radiator
Covered
Oil Leaks
Oil Pan
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran with smoke that mostly cleared.











Transmission
Operational, Dripping leak at the transfer case
Front Drive Axle
Front Axle Oscillating Pin
Rear Drive Axle
Final Drives
Limited Function Check
The drivetrain was operational.
























Pumps (Hydraulics)
Valves
Dripping leak in multiple locations
Hydraulic Tank
Dripping leak in multiple locations
Hoses (Hydraulic)
Worn, weathered
Swing Motor
Main Hoist
Lift Cylinders
Telescopic Boom Cylinders
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.


































Steering Linkage
Steering Cylinders
Steering Wheel Play
Suspension Cylinders
Brake Type
Air
Master Cylinder/Brake Control
The brakes are inoperable
Park Brake
Inoperable
Limited Function Check - Brakes
The service brakes are inoperable.
Turntable Bearing
Frame Condition
Tire Size
All of the tires are the same size, 16.00-24 Front tires
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs
Limited Function Check
The main chassis components were operational in a limited check.
Outrigger Cylinders
Covered
Outrigger Condition
Outrigger Beams
Outrigger Floats/Pads Condition
Heavy wear, Pads are bent in different spots, right rear pad is off center
Main Boom Pins
Main Boom Sections
Sheaves
Boom Head Section
Heavy wear
Wear Pads
Covered
Limited Function Check
The main crane components functioned when checked without a load.



Main Load Block
Heavy Wear
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jun 26, 2026 |
| Silicon | 2.02 PPM |
| Tin | 1.38 PPM |
| Silver | 0 PPM |
| Aluminum | 1.01 PPM |
| Chromium | 9.38 PPM |
| Lead | 8.44 PPM |
| Copper | 217.39 PPM |
| Nickel | 0.53 PPM |
| Iron | 48.84 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | >5% |
Items must be paid in full by Thursday, August 27, 2026. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.