France, FRA

ZH490D Engine • 400 V Rated Voltage

550 mm Front Discs • 550 mm Rear Discs • Roller Cage • "-dechaumeur 2 rangées de disques BULLHARR CC100CS 3M -24 disques 560mm/espacement entre disques 850mm -rouleau AR tubulaire 500mm/deflecteur anti projection -paliers sans entretien - option rangée de peignes"

Air Ride Suspension • Manual Roll Tarp • 11R22.5 Tires

Air Ride Suspension • 385/65R22.5 Tires

3 Cylinder Engine • Hydrostatic Drive

Ral 5012

2001 US EPA Label

2006 US EPA Label • Kubota D905 Engine

PTO

Deutz 2FL511 Engine

6.1 m Max Lift Height • 340 kg Max Weight Capacity • Platform Extension • Upper Control Box

2 Stage Mast • 3000 mm Max Lift Height • Forks • Side Shift • 4 Cylinder LPG Engine

2006 US EPA Label • Kubota D905 Engine

Kubota 3 Cylinder Engine • S/A Trailer

Perkins 4 Cylinder Engine • 400 V Rated Voltage

4 Cylinder Engine • /32 kW Rated 3 Phase Output • 400 V Rated Voltage

Deutz 2 Cylinder Engine

Hydrostatic Drive

4 Cylinder Engine • Euro 5 • Manual Transmission • 225/65R16 • Spring Suspension • 3000 mm x x Body • 3 Passengers

Euro 5 • 2 Passengers

YIELDBIB-VF

AXIOBIB 2

TM1000HP

to suit 2-5 to mini excavator • Oil flow: 40-80 l/min • operating pressure: 170-250 bar max • Copy of declaration of conformity available • 170kg

Flotation 648 • Tubeless

YIELDBIB-VF

SFT

to suit 1-3 ton mini excavator • with load holding valve • closing force 10kN • opening width 850mm • weight 101kg

/30 kW Rated 3 Phase Output • 400 V / 380 V Rated Voltage • 4 Cylinder Engine • /30 kW Rated 3 Phase Output • 400 V / 380 V Rated Voltage

to fit 1.5 - 5.5 ton excavators • CE Marked

to suit 1-3 ton mini excavator • with load holding valve • closing force 10kN • opening width 850mm • weight 103kg

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 1.5 - 5.5 ton excavators • CE Marked

to fit 5.2 - 11.5 ton excavators • CE Marked

c/w auger bit to suit 1 •5-4 ton excavator • Operating pressure: 60-220 bar • Oil flow rate: 15-50 l/minCopy of declaration of conformity available • 80kg

540 PTO • 3-Point Hitch • Morgnieux V15B14 1500 mm Snow Blade • 5-12 Front Tires • 8-16 Rear Tires

540 PTO • 3-Point Hitch • Maschio L-85 850 mm Rotary Tiller • 5.00-12 Front Tires • 8-18 Rear Tires

c/w auger bit to suit 1 •5-4 ton excavator • Operating pressure: 60-220 bar • Oil flow rate: 15-50 l/minCopy of declaration of conformity available • 80kg

to suit 2 •5-4 •5 ton excavator • with 35mm pin system (wide 150mm • pin to pin 240mm) and extra Pin 40mm (150mm) • with extra plate • Operating pressure: 90-120 bar • hydraulic flow range 25-50 L/min • Copy of declaration of conformity available 200 kg