St Aubin Sur Gaillon, FRA

to fit 1.5 - 5.5 ton excavators • CE marked

152D MICHELIN MACHXBIB

TL 158 D TRELLEBORG TM900HP

to fit 1.5 - 5.5 ton excavators • CE marked

to fit 2.7 - 5.5 ton excavators • CE marked

TL 158 D TRELLEBORG TM900HP

154D MICHELIN MACHXBIB 2

to fit 1.5 - 5.5 ton excavators • CE marked

to fit 1.5 - 5.5 ton excavators • CE marked

TL 145 D FIRESTONE MAXTR65

TL 138 D FIRESTONE PERF70

112 B MITAS AC85

to suit 1 •5-2 •5 ton excavator • 54kg • with 200mm auger bit

to fit 1.5 - 4.5 ton excavators • CE marked

to suit 3-6 ton excavator • 71kg • with 200mm auger bit

45" (1400mm) with 80mm pin system (wide 311mm • pin to pin 445mm) • to suit 18-22 ton excavator volume (SAE) 1120 l • weight: 1002kg; Screwed tooth system: 5 pieces Distance between bars: 100 mm Quantity bars: 12 pieces Thickness of the bars: 16mm Edge protector made of HB400 two side cutters each made of HB400 Heel protection made of HB400

to suit 12-20 ton excavator •

47" (1200mm) with 100/90mm pin system (wide 386mm • pin to pin 500mm) • Attention: it is possible to change the pin system into 100/100mm or 2 x 90mm (extra PIN´s are added to the bucket) to suit 28-36 ton excavator volume (SAE) 1160 l • weight: 1.342kg; Screwed tooth system: 5 pieces lip protectors out of wear resistance steel NM400 double side cutters out of wear resistance steel NM400 with heel shround out of wear resistance steel NM400 Side Plates S460 Rollsheet S355

to suit 2-4 ton excavator • 54kg • with 200mm auger bit

TL 146 B MITAS AC85

to suit 2-5 to mini excavator • 170kg

to suit 3 •5-10 ton excavator • with load holding valve • closing force 29kN • opening width 1206mm

to suit 2 •5-5 •5 ton mini excavator • with load holding valve • closing force 19kN • opening width 944mm • weight 200kg

(1400mm) with 90mm pin system (wide 351mm • pin to pin 485mm) • it is possible to change the pin system into 90/80mm or 2 x 80mm (extra PIN´s are added to the bucket) to suit 22-28 ton excavator volume (SAE) 1270 l • weight: 1311kg; Screwed tooth system: 5 pieces lip protectors out of wear resistance steel NM400 double side cutters out of wear resistance steel NM400 with heel shround out of wear resistance steel NM400 Side Plates S460 Rollsheet S355"

to fit 1.2 - 3.5 ton excavators • CE marked

to suit 2 •5-4 •5 ton excavator • with 35mm pin system (wide 140mm • pin to pin 165mm) • hydraulic flow range 25-50 L/min • 150 kg

TL 147 D TRELLEBORG TM800

to suit 2-5 ton mini excavator • closing force 23kN • opening width 1200mm • weight (with rotator) 170kg

TL 164 D TRELLEBORG TM1000HP

to suit 2-5 to mini excavator • 170kg

to suit 1 •5-4 ton excavator • with 30mm pin system (wide 110mm • pin to pin 125mm) • with extra plate • hydraulic flow range 23-30 L/min • Copy of declaration of confirmity available 150 kg

40" (1000mm) with 80mm pin system (wide 311mm • pin to pin 445mm) • to suit 18-22 ton excavator volume (SAE) 820 l • weight: 886kg; Screwed tooth system: 4 pieces lip protectors out of wear resistance steel NM400 double side cutters out of wear resistance steel NM400 with heel shround out of wear resistance steel NM400 Side Plates S460 Rollsheet S355

to suit 4-8 ton excavator • with 45mm pin system (wide 160mm • pin to pin 260mm) • hydraulic flow range 40-70 L/min • Copy of declaration of confirmity available 320 kg

Unused Häner Heavy Duty Rocket Digging Bucket HTL800-22-28 32" (800mm) with 90mm pin system (wide 351mm • pin to pin 485mm) • Attention: it is possible to change the pin system into 90/80mm or 2 x 80mm (extra PIN´s are added to the bucket) to suit 22-28 ton excavator volume (SAE) 670 l • weight: 911kg; Screwed tooth system: 3 pieces lip protectors out of wear resistance steel NM400 double side cutters out of wear resistance steel NM400 with heel shround out of wear resistance steel NM400 Side Plates S460 Rollsheet S355

to suit 7 •5-14 ton excavator • with load holding valve • closing force 48kN • opening width 1500mm • weight 630kg

45/45 greasing pins; 2 x unused Top Bracket with 80/80 greasing pins to suit CAT

to suit 4-13 ton excavator • with 45mm pin system • Impulse (t/kN) 4/40 • Oil flow (l/min) 45-85 • operating pressure (bar) 100-130 • weight (kg) 300

HHG3140 MS ECO 55" (1400mm) Tilt Ditch Bucket • Digging Buckets HTL360 24" (600mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03