147 Photos
Helenwood, TN
8,952 hrs
KMTPC242A54A32998
Loading...
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#13988477
In yard
No
Year
2013
Manufacturer
Model
Asset type
Serial number or VIN
KMTPC242A54A32998
Features
Air Conditioner, Rear View Camera, 2012 US EPA Label, 10 ft 5 in Stick, Auxiliary Hydraulic Plumbing, 31.5 in Triple Grouser Track Shoes, Hydraulic Quick Coupler, 54 in Digging Bucket, Hydraulic Thumb
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
KMTPC242A54A32998
Hour Meter / Odometer
8952 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Not operational
Travel Alarm
Operational
Seat Belts
Operational
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
2012 US EPA Label
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Limited Function Check
The drivetrain was operational.
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational, End of stick
Swing Motor
Hydraulic Center Swivel
Boom Lift Cylinder(s)
Stick Cylinder
Bucket Cylinder
Thumb Cylinder
Limited Function Check
The hydraulic system was operational.
Boom Condition
Stick Condition
Plated, Bent metal
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pins and Bushings Stick to Coupler
Slight movement
Turntable Bearing
Bottom Covers
Limited Function Check
The main components were operational in a limited check.
Left Roller Frame
Left Track Tensioner
Left Track Shoes
Left Grouser Height
31 mm
Left Track Links
Left Carrier Rollers
Left Track Rollers
Worn bearings
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Shoes
Loose bolts, Worn edges
Right Grouser Height
30 mm
Right Track Links
Right Carrier Rollers
Right Track Rollers
Right Idler
Right Sprocket
Excavator Bucket Condition
Cutting Edge / Teeth / Adapters
Quick Coupler
Not operationally checked
Thumb
Hydraulic thumb, Cracked metal
Oil Sample Analysis
engine | |
---|---|
date of analysis | Sep 18, 2025 |
Silicon | 8.04 PPM |
Tin | 1.7 PPM |
Silver | 0 PPM |
Aluminum | 3.38 PPM |
Chromium | 1.63 PPM |
Lead | 0.18 PPM |
Copper | 0.76 PPM |
Nickel | 0.25 PPM |
Iron | 13.28 PPM |
Glycol | NEG |
Water | NEG |
Fuel | <5% |
Items must be paid in full by Wednesday, December 24, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.