126 Photos
1991 Dresser 850 Motor Grader
Located
Helenwood, TN
Usage
9,899 hrs
Serial number
G580010U200415
Loading...
Detailed equipment information
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#13988472
In yard
No
Year
1991
Manufacturer
Model
Asset type
Serial number or VIN
G580010U200415
Features
Enclosed Cab, US EPA Label, 12 ft / 3.66 m Moldboard, Push Block, Front Scarifier, 14.00-24 Tires
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
G580010U200415
CE Mark
No CE mark found
Hour Meter / Odometer
9899 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Safety
Travel Alarm
Inoperable
Seat Belts
Not equipped
Control Station
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Drivetrain Controls
Not all gears functioned
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Articulation gauges are inoperable
Heater
Not operationally checked
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
US EPA Label
Emission Label
Blow-by (subjective visual observation)
Significant
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Dripping leak, Some gears inoperable
Rear Drive Axle
Rear Tandems (Chain Drives)
Limited Function Check
Some gears inoperable
Hydraulics
Pumps (Hydraulics)
Valves
Dripping leak
Hydraulic Tank
Hoses (Hydraulics)
Articulation Cylinders
Blade Lift Cylinders
Some movement
Blade Angle Cylinders
Some movement
Blade Side Shift Cylinders
Dripping leak on the right cylinder
Saddle Positioning Cylinder
Some movement
Saddle Lock Pin
Not operationally checked
Steering Cylinders
Some movement
Wheel Lean Cylinders
Some movement
Limited Function Check
The hydraulic system was operational.
Chassis
Y-frame
Y-frame Pivot Trunnion
Heavy movement
Blade Tilt Frame (saddle)
Loose bolts, some wear
Circle Frame and Brackets
Circle Wear Strips
Missing
Circle Support Brackets
Broken brackets, weld repairs
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips
Missing some wear strips
Articulating Center Pins
Some movement
Front Axle Oscillating Pin
Some movement
Steering Linkage
Wheel Tilt Linkage
Some movement
Limited Function Check (grader)
The main components were operational with movement as indicated.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Small crack
Tire Brands
Left Front: BKT, Left Middle: Firestone, Left Rear: Galaxy, Right Rear: General, Right Middle: Firestone, Right Front: Firestone
Left Steer Tire
Left Front Drive Tires
Left Rear Drive Tires
Right Rear Drive Tires
Right Front Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Specialty
Blade Condition
Blade Cutting Edge Condition
Scarifier
No teeth
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Sep 18, 2025 |
| Silicon | 4.21 PPM |
| Tin | 0.82 PPM |
| Silver | 0 PPM |
| Aluminum | 1.13 PPM |
| Chromium | 0.02 PPM |
| Lead | 0.09 PPM |
| Copper | 0.32 PPM |
| Nickel | 0.12 PPM |
| Iron | 4.66 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Wednesday, December 24, 2025. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(770) 304-3355Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.